Multi-Functional Motion Sensors for All Types of Automatic Doors

• Customization: Available
• Type: Motion Sensor
• Output Signal Type: Analog Type
• Model NO.: YET-DS18
• Movement: Person or Pet
• Production Process: SemiConductor Integrated
• Material: Plastic
• Accuracy Grade: 1.0G
• IP Rating: IP56
• Certification: CE
• Customized: Non-Customized
• Origin: Guangdong
• Production Capacity: 50000PCS/Year

Product Description

Multi-functional motion sensors for all types of automatic doors

1. Introduction


2. Installation and adjustment
A.Installation of sensors
1) Connect the cable to the corresponding terminal of the automatic 
door
a) Pins 1 and 2 ( brown and green ) are power inputs (DC: 12-30V AC: 9-
24V).
 b) Pins 3 and 4 (white and yellow) are signal outputs (COM, NO).
 2) Remove the outer cover and secure the base with the screws
 3) Connecting the cable terminals to the inductor
4) Connect power to the sensor and the sensor's indicator light flashes 
five times
5) Adjustment of sensitivity potentiometer and sensing angle (left/right 
declination and longitudinal inclination)
6) Close the cover and perform a test to verify, if not, repeat step 5 until 
the sensing range is appropriate.
B.Gear Adjustment
Stall adjustment (adjustment potentiometer) vertical angle 30 °, height 2.6m

C.Antenna angle adjustment
Antenna horizontal skew angle adjustment (left and right skew angle ±30°)

Antenna longitudinal inclination adjustment (recommended angle 15°-45°)

Note:The test values in this manual are reference values, not guaranteed 
values.
There will be deviation due to different bodies. In particular, the detection 
area may change when doors, floors and surrounding walls are made of 
metal.
The detection area may change when the door, floor and surrounding wall 
materials are metal, so use the sensitivity buttons to make appropriate 
adjustments.

3. Installation considerations
1). Secure the sensor tightly to prevent vibration.
2). Sensors should not be installed directly behind panels or other 
materials.
3). No moving or shaking objects should be placed in the detection area.
4). There should be no fluorescent source in the detection area.
5). The internal electronic components of the product have been 
protected by a case, do not open during installation.

4. Troubleshooting


5. Technical performance